Billy Whizz
Superbike Rider
ZZR1400 ALL BARK ALL BITE
Posts: 1,505
|
Post by Billy Whizz on Dec 5, 2013 16:45:08 GMT
can anyone help me get hold of a sheet of steel approx 800mm x 300mm x 10mm thick
|
|
nickw
Superbike Rider
Posts: 3,404
|
Post by nickw on Dec 5, 2013 20:45:57 GMT
Only places locally that I can think of Kev are Carter Steel on Yarm Rd opposite Merc garage, or the other possibility is Francis Brown Engineering which is on Church Road at Stockton, but not easily visible.... If you travel towards Portrack from the Simon Bailes Peugeot dealership, get into Lane 1 and then at the top of the bank you do a 180 left and come back parallel to where you've just been coming from and it's down there, or at least it used to be.
I got some off cuts recently from Carter Steel, but none of it's cheap.
|
|
Wheelnut
Superbike Rider
Tesco or bust!
Posts: 4,231
|
Post by Wheelnut on Dec 5, 2013 22:13:59 GMT
If you travel towards Portrack from the Simon Bailes Peugeot dealership, get into Lane 1 and then at the top of the bank you do a 180 left and come back parallel to where you've just been coming from and it's down there, or at least it used to be. It's right at the end now, the buzzer for the gate is on the right.
|
|
Hitman
Superbike Rider
Posts: 1,268
|
Post by Hitman on Dec 6, 2013 9:00:53 GMT
I got some from Carter Steel on Yarm Rd, but they do charge normal prices.
|
|
Mainjetmike
Superbike Rider
There is only one 46 !
Posts: 2,946
|
Post by Mainjetmike on Dec 6, 2013 9:54:33 GMT
Are you building a battleship ?
|
|
Billy Whizz
Superbike Rider
ZZR1400 ALL BARK ALL BITE
Posts: 1,505
|
Post by Billy Whizz on Dec 6, 2013 11:32:13 GMT
|
|
jacko
Pit Crew
tha zombies are coming
Posts: 141
|
Post by jacko on Dec 6, 2013 16:36:18 GMT
I got some from Carter Steel on Yarm Rd, but they do charge normal prices. yea but smallest size is 2 metres by 2 was in there the other day ended up going to the place of newport roundabout near the diy place
|
|
booya
Trackday Legend
Posts: 239
|
Post by booya on Dec 7, 2013 10:08:00 GMT
What's the price of it? And what you reckon the price for 20x20mm box section is?
|
|
jacko
Pit Crew
tha zombies are coming
Posts: 141
|
Post by jacko on Dec 7, 2013 15:49:10 GMT
Don't know bud as far too big for what I wanted don't think it's that expensive though , that was sheet steel pop in and ask I'm sure they sell to the public
|
|
|
Post by scratchnsniff24 on Dec 8, 2013 16:53:28 GMT
What's the price of it? And what you reckon the price for 20x20mm box section is? Do I know where this is going? (that laughing guy doesn't work on mobile)
|
|
Billy Whizz
Superbike Rider
ZZR1400 ALL BARK ALL BITE
Posts: 1,505
|
Post by Billy Whizz on Dec 12, 2013 12:08:15 GMT
Got some from thompsons steel nr newport bridge cheers jacko
|
|
jacko
Pit Crew
tha zombies are coming
Posts: 141
|
Post by jacko on Dec 12, 2013 14:00:06 GMT
Your welcome bud did you get the miserable git lol
|
|
booya
Trackday Legend
Posts: 239
|
Post by booya on Dec 13, 2013 3:09:40 GMT
What's the price of it? And what you reckon the price for 20x20mm box section is? Do I know where this is going? (that laughing guy doesn't work on mobile) Me armed with a grinder and a mig set (when I get one) can achieve anything!
|
|