booya
Trackday Legend
Posts: 239
|
Post by booya on Jan 26, 2014 0:48:28 GMT
I have a dilemma, I have acquired an exhaust off a mate, I intend on fitting it to my bike but the link pipe is the wrong size and shape.
So, I'm going to be cutting my old link pipe and the new link pipe to make a correct combination.
My only issue is the both are stainless steel and the only welding gear I have access to is only suitable for carbon steel.
Would anyone be so kind to help me out and welding it up? I cant offer a great deal but I can slip you a bit of cash and a crate of beer to the gentleman who might be able to help me.
Thanks in advance!
|
|
ROADRUNNER
Supersport Rider
PREV DR600/CBR600BORO
Posts: 647
|
Post by ROADRUNNER on Jan 26, 2014 8:47:15 GMT
The amount of time and work it will take to do it and make it look good you might as well just take it to kev Pickering exhausts a link pipe it's a very reasonable priced item from him
|
|
|
Post by Lee on Jan 26, 2014 9:00:34 GMT
Kev Pickering normally charges £20-£30 for such a job, obviously it'll depend on how many cuts and welds it takes, but give him a bell and ask yourself. His welding is Megga neat. Details in the sponsors area
|
|
David
Superbike Rider
Bob's Bike
Posts: 3,824
|
Post by David on Jan 26, 2014 9:20:53 GMT
|
|
booya
Trackday Legend
Posts: 239
|
Post by booya on Jan 26, 2014 12:19:51 GMT
Its not that far out and doesn't need to look perfect, one cut should do it. The only issue I have with someone doing all the work is I can't get the bike to anywhere to get it to fit up properly. I used to be a fabricator so its not like I'm going in blind. I'd have welded it myself if I had the gear.
Reckon he'll do just the welding if I get all the cuts done and marked up so they're welded together at the right place?
|
|
booya
Trackday Legend
Posts: 239
|
Post by booya on Jan 26, 2014 12:21:10 GMT
Is he the one I heard about near Teesside airport?
|
|
David
Superbike Rider
Bob's Bike
Posts: 3,824
|
Post by David on Jan 26, 2014 12:22:10 GMT
Is he the one I heard about near Teesside airport? Yes
|
|
booya
Trackday Legend
Posts: 239
|
Post by booya on Jan 26, 2014 12:26:15 GMT
One of my mates dad used him for custom silencers on his custom build sports choppers.
|
|
booya
Trackday Legend
Posts: 239
|
Post by booya on Jan 26, 2014 15:38:07 GMT
Got to work on the link pipe after half an hour with a grinder its almost done. Just needs welding at the two joins. Here is a mock up:
|
|