|
|
Post by tlrdreaming on Aug 24, 2014 8:25:17 GMT
NEED pointing in the right direction for a mechanic who knows his aprilia RSV's.... Ideally ex petite and France or similar. .
Sent from my GT-I9505 using proboards
|
|
David
Superbike Rider
Bob's Bike
Posts: 3,824
|
Post by David on Aug 24, 2014 8:41:58 GMT
AMR at Bellerby may be able to help, have read some stuff on other Forums about guys taking Aprilias there.
There's always Teasdales at Thirsk an Aprilia main dealer.
|
|
|
|
Post by iconic944ss on Aug 24, 2014 11:04:25 GMT
Problems?..
Vee twin services (VTS) Consett. Ex M&S motorcycles newcastle.
Top man.
|
|
|
|
Post by tlrdreaming on Aug 24, 2014 11:12:28 GMT
Have we got any advance on someone local... lol...
But thank you for your reply ' s so far ;D
Sent from my GT-I9505 using proboards
|
|
David
Superbike Rider
Bob's Bike
Posts: 3,824
|
Post by David on Aug 24, 2014 19:45:29 GMT
Have we got any idea why a mechanic is needed?
|
|
|
|
Post by tlrdreaming on Aug 24, 2014 20:33:58 GMT
Because it's Italian and awkward and various issues need fixing before it ventures out further than teesside. . Not least my speedo doesn't work!!
Sent from my GT-I9505 using proboards
|
|
David
Superbike Rider
Bob's Bike
Posts: 3,824
|
Post by David on Aug 24, 2014 21:22:17 GMT
"Google" may fix it, loads of info available on speedo problems.
|
|
|
|
Post by iconic944ss on Aug 24, 2014 21:32:45 GMT
Wasnt there a shop in Aycliffe that rebuilt an RSV? All carbon bodywork iirc?? As for info: www.ridersite.ws |
|
David
Superbike Rider
Bob's Bike
Posts: 3,824
|
Post by David on Aug 24, 2014 22:11:15 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 25, 2014 18:12:39 GMT
Teesdale M/C in Thirsk are the specialists.
Speedo on mine wouldn't work after a tyre swap. Just take out the sensor (Carefully) from the rear caliper, clean inc. the inside of the hole and put back in properly - Speedo issue solved. It only needs to be out a fraction of a mm and it wont pick up your speed from the rear wheel.
|
|
|
|
Post by tlrdreaming on Aug 25, 2014 20:43:14 GMT
Teesdale M/C in Thirsk are the specialists. Speedo on mine wouldn't work after a tyre swap. Just take out the sensor (Carefully) from the rear caliper, clean inc. the inside of the hole and put back in properly - Speedo issue solved. It only needs to be out a fraction of a mm and it wont pick up your speed from the rear wheel. I've tried this once but will have another go... read on one rsv post it reads the nuts on the rear disk and if they aren't clean it fails.... fooking Italian! !! Sent from my GT-I9505 using proboards |
|
