kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 19, 2014 16:15:52 GMT
Hi Ladies/Gents
Last week I bought second hand GoPro Hero2. Supposed to be with all brackets and stuff.
It came with standard bracket/clip (possibly display only) and waterproof / skeleton housings.
I thought is worth to ask if anyone got some spare laying around and want to sell cheap or lend it for few weeks till my pay day ?
Thanks in advance.
kamas
|
|
|
|
Post by Milky C on Oct 19, 2014 21:25:37 GMT
|
|
kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 19, 2014 21:55:25 GMT
I have No.1 (the quick release attached to waterproof/skeleton housing) but as you can imagine got no way to attach it to anything - no suction clamp/sticky tape/ handle bar clamp. Thanks for links  |
|
|
|
Post by Milky C on Oct 19, 2014 22:11:01 GMT
I dont bother with suction or handlebar clamps, the adhesive ones are all I would generally use. Some handlebar ones are quality but mine vibrated like hell.
|
|
kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 19, 2014 22:25:29 GMT
Good points I was thinking about handle bar clamp just for playing with settings as planning to change my helmet in (not very near  ) future but once applied sticky tape one I think that's permanent (am I right ?) |
|
|
|
Post by Milky C on Oct 20, 2014 20:27:07 GMT
No no you can remove the sticky with a bit of heat, warm it up with a hair dryer and peel it off. Why not stick it on the bike instead of the helmet?
|
|
kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 20, 2014 22:02:45 GMT
Wouldn't like to ruin paintwork on bike I have for less than a month :/
|
|
|
|
Post by scratchnsniff24 on Oct 20, 2014 23:54:51 GMT
3M industrial strength hook and loop (AKA Velcro) works very well and has been tested at over 100mph by some vloggers. Might be worth looking at, if not strictly going ahead with |
|
|
|
Post by Milky C on Oct 21, 2014 19:01:16 GMT
Wouldn't like to ruin paintwork on bike I have for less than a month :/ If you manage to ruin the paintwork with a bit of 3m and a hairdryer you need locking up  |
|
kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 21, 2014 19:12:59 GMT
Another question:
Where is best place for camera to get very little wind noise?
|
|
johndc
Superbike Rider
Posts: 2,613
|
Post by johndc on Oct 21, 2014 20:03:49 GMT
Another question: Where is best place for camera to get very little wind noise? behind the screen the camera will pick up noise from wherever you mount it |
|
|
|
Post by scratchnsniff24 on Oct 21, 2014 20:20:20 GMT
Best thing to do for awesome audio is to get an external mic, like the Zoom H2, and just put it in your pocket. Then sync it up using the horn in editing software. It's more work, but it'll kick the excrement out of any other way of recording audio. Fireblade sound CB500 sound Seems to be the way most vloggers are doing it now, too. |
|
|
|
Post by scratchnsniff24 on Oct 21, 2014 20:25:02 GMT
Also this! I want a Nuda just for that sound! Best parallel twin evarrrrrr. |
|
kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 21, 2014 21:51:59 GMT
Looks like I would need bigger screen to fit everything behind (includes me  ) It starts to putting me off of all this mess ---and I did look for H2n but £200 ??!! I would happily invest it in new exhaust |
|
|
|
Post by scratchnsniff24 on Oct 21, 2014 22:50:08 GMT
Looks like I would need bigger screen to fit everything behind (includes me ) It starts to putting me off of all this mess ---and I did look for H2n but £200 ??!! I would happily invest it in new exhaust Check the one out on that YZF750, you could build a house behind that big barsteward!  Ahhhhh, sorry, that's my bad  Zoom H1 Schaaf with the 'blade and cb500 uses the H1, and RJ with the Nuda uses the H2 (along with a few other vloggers Accidental Broadcast etc) If you find it rattles round in your pocket just get a cheap bit of foam, cut it in half, sandwich it between them, then pop it in your pocket. It'll stop any extra wind noise, like that which hits your jacket, as an added bonus. It's the setup I plan on using (maybe with a chin mount, I like that view), when I've done everything else, but everything else is a bloody long list, and it keeps on growing  You'll have to post up the results when you're done, man |
|
kamas
Superbike Rider
Nothing to say
Posts: 2,795
|
Post by kamas on Oct 22, 2014 19:09:06 GMT
Looks like I would need bigger screen to fit everything behind (includes me ) It starts to putting me off of all this mess ---and I did look for H2n but £200 ??!! I would happily invest it in new exhaust Check the one out on that YZF750, you could build a house behind that big barsteward! Ahhhhh, sorry, that's my bad Zoom H1 Schaaf with the 'blade and cb500 uses the H1, and RJ with the Nuda uses the H2 (along with a few other vloggers Accidental Broadcast etc) If you find it rattles round in your pocket just get a cheap bit of foam, cut it in half, sandwich it between them, then pop it in your pocket. It'll stop any extra wind noise, like that which hits your jacket, as an added bonus. It's the setup I plan on using (maybe with a chin mount, I like that view), when I've done everything else, but everything else is a bloody long list, and it keeps on growing You'll have to post up the results when you're done, man Sorry mate but don't want to ride with wardrobe in front of me I am watching Royal Jordanian very often but I've got no budget for stuff he has Could not wait longer for my payday so used credit card (  ) and ordered some bracket - should be here soon Below some video recorded on HD2 - sorry but hands not so steady |
|
) future but once applied sticky tape one I think that's permanent (am I right ?)
)
) and ordered some bracket - should be here soon