|
|
Post by dragonslayer1965 on Jul 13, 2011 22:32:37 GMT
you need to do a bit ov Murder Death Kill  tell em to sort it properly or else you take legal action  |
|
|
|
Post by nigec on Jul 13, 2011 22:53:49 GMT
what did they change, just the seal?
What bike is it the YBR? what year?
Me I'd just take the fork leg out and do it myself or take it to one of the site sponsors to check the insides of the leg for wear
|
|
|
|
Post by columbo1977 on Jul 14, 2011 8:08:06 GMT
I see what you saying Nige but why should I pay for something, I don't have enough money as it is, it has been like this since I got it. It's a 58 plate Ybr.
My instructor looked at it Fozzy and he told me it has gone again, I just thought I was being paranoid.
It's not good.
|
|
|
|
Post by nigec on Jul 14, 2011 9:36:23 GMT
It might be worth getting in touch with Yamaha to see if there's been a recall notice for any fork seal issues I wonder if they keep putting the seal the wrong way up, easily done if someone had changed the seal and they are replacing the same way. if I fitted a seal I'd use the old one to double check which way is up  you could pop the dustcaps off and see if they look similar |
|
|
|
Post by columbo1977 on Jul 19, 2011 20:41:58 GMT
well, seals gone again (3rd time) left two messages for dealer to ring me back..... This is getting very tiresome, only had the bike since April and its been took back 4 times, this will be the 5th  |
|
|
|
Post by ZX6-Chris on Jul 20, 2011 11:16:08 GMT
if you get chance go to the Citazins advice about it,.. they will tell you what to do |
|
|
|
Post by columbo1977 on Jul 25, 2011 17:17:06 GMT
Bike is going in tomorrow for the 4th set of seals.....
|
|
|
|
Post by fozzybear on Jul 27, 2011 15:10:46 GMT
have they got it done yet graham? |
|
tell em to sort it properly or else you take legal action 
